TM-9-2330-342-23-P

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; FIELD MANUAL

OCTOBER 2012

TM-9-2330-342-23-P - Page 386 of 1348

QUICK RELEASE

VALVE

AIR

LINE

2660

TRANSDUCER

Figure 3.

Quick Release Valve and Air Line 2660.

3.

Push in trailer charge valve in vehicle. Refer to vehicle Operator's manual (WP

0190).

4.

Perform ICE Test 50.

5.

While assistant fully applies brake pedal, push up on control rod and observe meter. Refer to vehicle Operator's

manual (WP

0190).

6.

Meter should display 125 ± 5 psi (861 ± 34 kPa).

CONDITION/INDICATION

Is load sensing valve adjusted correctly and supplying 30 to 125 ± 5 psi (207-861 ± 34 kPa)?

DECISION

Yes - Go to (Step 4 - Is load sensing valve adjusted correctly and supplying 30 to 125 ± 5 psi (207-861 ± 34

kPa)?).

No - Replace load sensing valve (WP

0080). Go to (Step 7 - Do service brakes apply correctly?) to verify problem

is solved.

STEP 4

Is load sensing valve adjusted correctly and supplying 30 to 125 ± 5 psi (207-861 ± 34 kPa)?

1.

Have assistant turn engine start switch to ON. Refer to vehicle Operator's manual (WP

0190).

2.

Perform ICE Test 50.

QUICK RELEASE

VALVE

AIR

LINE

2660

TRANSDUCER

Figure 4.

Quick Release Valve and Air Line 2660.

TM 9-2330-342-23&P

0040

0040-4