TM-9-2330-342-23-P

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; FIELD MANUAL

OCTOBER 2012

TM-9-2330-342-23-P - Page 443 of 1348

FIELD MAINTENANCE

FIELD LEVEL PMCS - ANNUAL

INITIAL SETUP:

Tools and Special Tools

Gun, Grease (Refer to vehicle Operator's manual)

(WP

0190)

Materials/Parts

Grease, Automotive and Artillery (GAA)

(WP

0193, Table 1, Item 33, 34, 35, 36, 37)

Table

1.

FIELD LEVEL PMCS - ANNUAL.

ITEM

NO.

INTERVAL

ITEM TO BE

CHECKED OR

SERVICED

PROCEDURE

EQUIPMENT

NOT READY/

AVAILABLE IF:

1

Annual

Drawbar

Bushings

NOTE

•

If an air-operated grease gun does

not purge the fitting, use a hand-

operated grease gun. If the part does

not purge, remove fitting and clean,

install fitting and grease again. If part

still does not purge, refer to

maintenance task for that

component.

•

When using a grease gun, apply

lubricant to the fitting until clean

lubricant squeezes out of the part

being lubricated.

Lubricate the drawbar bushings with GAA (WP

0193,

Table 1, Item 33, 34, 35, 36, 37) every 6,000 miles (9,656

km) or annually, whichever comes first.

Fittings will not purge old

lubricant out of

component.

TM 9-2330-342-23&P

0048

0048-1