TM-9-2330-342-23-P

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; FIELD MANUAL

OCTOBER 2012

TM-9-2330-342-23-P - Page 436 of 1348

Table

1.

FIELD LEVEL PMCS - SEMI-ANNUAL - Continued.

ITEM

NO.

INTERVAL

ITEM TO BE

CHECKED OR

SERVICED

PROCEDURE

EQUIPMENT

NOT READY/

AVAILABLE IF:

9

Semi-

Annual

Slack Adjusters

and Camshaft

Bushings

NOTE

•

If an air-operated grease gun does

not purge the fitting, use a hand-

operated grease gun. If the part does

not purge, remove fitting and clean,

install fitting and grease again. If part

still does not purge, refer to

maintenance task for that

component.

•

When using a grease gun, apply

lubricant to the fitting until clean

lubricant squeezes out of the

pressure relief seal under pawl

button on slack adjuster and the part

being lubricated.

Lubricate all slack adjusters and camshaft bushings with

GAA (WP

0193, Table 1, Item 33, 34, 35, 36, 37) every

3,000 mi (4,828 km) or semi-annually, whichever comes

first.

Fittings will not purge old

lubricant out of

component.

SLACK ADJUSTERS AND

CAMSHAFT BUSHINGS

PAWL

BUTTON

LUBRICATE

FITTING

CAMSHAFT SPIDER

BUSHING

LUBRICATE

FITTINGS

Figure 8.

Field Level PMCS Semi-Annual.

TM 9-2330-342-23&P

0047

0047-6