3.
Ensure vehicle is returned to normal operating condition.
4.
Have assistant turn engine start switch to ON. Refer to vehicle Operator's manual (WP
0190).
5.
Push in trailer charge valve in vehicle. Refer to vehicle Operator's manual (WP
0190).
6.
While assistant drives vehicle, observe suspect wheel.
7.
Stop vehicle. Refer to vehicle Operator's manual (WP
0190).
8.
Pull out trailer charge valve in vehicle. Refer to vehicle Operator's manual (WP
0190).
9.
Have assistant turn engine start switch to OFF. Refer to vehicle Operator's manual (WP
0190).
CONDITION/INDICATION
Does suspect wheel wobble and shimmy?
DECISION
Wheel OK - Problem fixed.
Wheel Wobbles - Problem is not fixed. Problem may have been missed during previous steps of troubleshooting.
Repeat all previous steps of this procedure. Go to (Step 1 - Is tire pressure correct according to table?). If problem
still exists after all troubleshooting tests are accomplished, contact your Supervisor.
END OF WORK PACKAGE
TM 9-2330-342-23&P
0045
0045-8