TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 452 of 1348
WARNING
SOLVENT CLEANING COMPOUND (DRYCLEANING SOLVENT)
•
Solvent cleaning compound MIL-PRF-680 Type II and III may be irritating to the eyes
and skin. Use protective gloves and goggles. Use in a well-ventilated area. Use
respirator as needed. Accidental ingestion can cause irritation of digestive tract and
respiratory tract, may cause lung and central nervous system damage. Can be fatal
if swallowed. Inhalation of high/massive concentrations can cause coma or be fatal.
First aid for ingestion: do not induce vomiting. Seek immediate medical attention.
First aid for skin contact: remove contaminated clothing. Wash skin thoroughly with
soap and water. If symptoms persist, seek medical attention. First aid for eye contact:
flush with water for 15 minutes or until irritation subsides. If symptoms persist, seek
medical attention. First aid for inhalation: move to fresh air. If not breathing, provide
artificial respiration. If symptoms persist, seek medical attention. Keep away from
open flames and other sources of ignition. Failure to comply may result in injury or
death to personnel.
•
The flashpoint for Type II solvent cleaning compound is 141 to 198°F (61 to 92°C),
and Type III is 200 to 241°F (93 to 116°C).
•
Improper cleaning methods and use of unauthorized cleaning solvents may result in
injury to personnel and/or damage to equipment.
•
Fire extinguishers should be placed nearby when using solvent cleaning compound.
Failure to comply may result in injury or death to personnel.
•
Cloths or rags saturated with solvent cleaning compound must be disposed of IAW
authorized facilities' procedures. Failure to comply may result in injury to personnel.
•
Face shield must be worn when cleaning with a wire brush. Failure to comply may
result in injury to personnel.
•
If personnel become dizzy while using cleaning solvent, immediately get fresh air and
medical help. If solvent contacts skin or clothes, flush with cold water. If solvent
contacts eyes, immediately flush eyes with water and get immediate medical
attention. Failure to comply may result in injury or death to personnel.
Remove any metal strapping, plywood, tapes, seals, wrapping or any other shipping and protective items. If any
parts are coated with lubricating oil, remove it using solvent cleaning compound (WP
0193, Table 1, Item 13, 14,
15, 16, 17, 18). Read and follow all instructions contained in DD Form 1397 (WP
0190), "Processing and
Deprocessing Record of Shipping, Storage, and Issue of Trucks and Spare Engines". Inspect flatrack for damage
incurred during shipping. If flatrack has been damaged, report the damage on SF 364 (WP
0190) Supply
Discrepancy Report. Check the equipment against the packing slip to ensure shipment is complete. Report all
discrepancies in accordance with DA PAM 750-8 (WP
0190).
END OF TASK
TM 9-2330-342-23&P
0050
0050-2
Back to Top
