TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 459 of 1348
12 VOLT CABLE REPAIR - Continued
3
4
5
2
1
Figure 4.
12 Volt Cable Disassembly.
9.
Cut terminal end (Figure 4, Item 2) from wire (Figure 4, Item 5). Discard terminal end.
10.
Remove insulation 0.25 in. (6.35 mm) from end of wire.
ASSEMBLY
1.
Install terminal end (Figure 5, Item 2) on wire (Figure 5, Item 5).
3
4
5
2
1
Figure 5.
12 Volt Cable Assembly.
2.
Install terminal end (Figure 5, Item 2) on connector (Figure 5, Item 3) with screw (Figure 5, Item 4).
3.
Install plastic covers (Figure 5, Item 1) on connector (Figure 5, Item 3).
4.
Install connector (Figure 6, Item 4) in housing (Figure 6, Item 3) with two screws (Figure 6, Item 5).
1
2
3
4
5
6
7
Figure 6.
12 Volt Cable Assembly.
TM 9-2330-342-23&P
0051
0051-3
Back to Top
