TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 460 of 1348
12 VOLT CABLE REPAIR - Continued
5.
Install cable clamp (Figure 6, Item 6) and spring (Figure 6, Item 7) on housing (Figure 6, Item 3) with two
lockwashers (Figure 6, Item 1) and screws (Figure 6, Item 2).
6.
Install terminal (Figure 7, Item 2) on wire (Figure 7, Item 1).
1
2
3
4
5
6
7
Figure 7.
12 Volt Cable Assembly.
7.
Install seven terminals (Figure 7, Item 2) in connector (Figure 7, Item 3).
8.
Install washer (Figure 7, Item 4), spring washer (Figure 7, Item 5), collar (Figure 7, Item 6), and sleeve (Figure
7, Item 7) on connector (Figure 7, Item 3).
9.
Install boot (Figure 8, Item 1), seal (Figure 8, Item 3), grommet (Figure 8, Item 4) and nut (Figure 8, Item 5) on
connector (Figure 8, Item 2).
1
2
3
4
5
6
7
8
Figure 8.
12 Volt Cable Assembly.
10.
Install two cable clamps (Figure 8, Item 8) on connector (Figure 8, Item 2) with two lockwashers (Figure 8, Item
7) and screws (Figure 8, Item 6).
END OF TASK
TM 9-2330-342-23&P
0051
0051-4
Back to Top
