TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 462 of 1348
24 VOLT CABLE REPAIR - Continued
NOTE
Tag and mark all wires prior to removal.
5.
Remove wire (Figure 10, Item 3) and terminal (Figure 10, Item 5) from connector (Figure 10, Item 6).
NOTE
Cut wire as close to damaged terminal as possible.
6.
Cut off terminal (Figure 10, Item 5) at end of wire (Figure 10, Item 3). Remove insulation (Figure 10, Item 4)
0.25 in. (6.35 mm) from end of wire (Figure 10, Item 3). Discard terminal.
ASSEMBLY
1.
Install heat shrink (Figure 11, Item 2) to end of cable (Figure 11, Item 3).
1
2
3
4
5
6
7
8
9
Figure 11.
24 Volt Cable Assembly.
2.
Install terminal (Figure 12, Item 4) on wire (Figure 12, Item 3).
1
2
3
4
5
6
7
8
Figure 12.
24 Volt Cable Assembly.
3.
Install terminal (Figure 12, Item 4) on connector (Figure 12, Item 5).
TM 9-2330-342-23&P
0051
0051-6
Back to Top
