TM-9-2330-342-23-P

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; FIELD MANUAL

OCTOBER 2012

TM-9-2330-342-23-P - Page 682 of 1348

REMOVAL - Continued

3.

Remove three fittings (Figure 1, Item 9), (Figure 1, Item 3), and (Figure 1, Item 6) from quick release valve

(Figure 1, Item 8).

END OF TASK

INSTALLATION

WARNING

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,

and are harmful to skin and clothing. Keep away from open flame and use in well-ventilated

area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately

with soap and water. Failure to comply may result in injury or death to personnel.

CAUTION

Use sealing compound sparingly and only on threads. Do not apply sealing compound on

hose connections. Damage to equipment may result.

1.

Apply sealing compound on threads of fitting (Figure 2, Item 1).

1

2

3

4

Figure 2.

Quick Release Valve Installation.

2.

Install fitting (Figure 2, Item 1) on quick release valve (Figure 2, Item 2).

3.

Apply sealing compound on threads of fitting (Figure 2, Item 4).

4.

Install fitting (Figure 2, Item 4) on quick release valve (Figure 2, Item 2).

5.

Apply sealing compound on threads of fitting (Figure 2, Item 3).

6.

Install fitting (Figure 2, Item 3) on quick release valve (Figure 2, Item 2).

7.

Install quick release valve (Figure 3, Item 8) on bracket (Figure 3, Item 10) with two screws (Figure 3, Item 7)

and locknuts (Figure 3, Item 2).

TM 9-2330-342-23&P

0075

0075-2