TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 869 of 1348
INSTALLATION - Continued
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. Keep away from open flame and use in well-ventilated
area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately
with soap and water. Failure to comply may result in injury or death to personnel.
14.
Apply a thin film of sealant on tow ring bracket (Figure 13, Item 3).
15.
Install tow ring bracket (Figure 13, Item 3) and drawbar tow ring (Figure 13, Item 4) on drawbar (Figure 13,
Item 2) and plate (Figure 13, Item 1) with four lower screws (Figure 13, Item 5) and locknuts (Figure 13, Item
6). Tighten screws to 410 lb-ft (556 N·m).
16.
Install two handles (Figure 14, Item 1) and (Figure 14, Item 3) on plate (Figure 14, Item 5) and drawbar (Figure
14, Item 2) with four upper screws (Figure 14, Item 4) and locknuts (Figure 14, Item 6). Tighten locknuts to
410 lb-ft (556 N·m).
1
6
5
3
4
2
Figure 14.
Drawbar Lifting Handle/Tow Ring/Adjusting Pin Installation.
WARNING
Drawbar weighs 425 lbs (193 kg). Attach suitable lifting device prior to removal. Failure to
comply may result in injury or death to personnel.
17.
Remove jackstand from under drawbar (Figure 14, Item 2).
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Spot paint exposed areas (TM 43-0139). (WP
0190)
TM 9-2330-342-23&P
0102
0102-11
Back to Top
