TM-9-2330-356-14
SEMITRAILER, TANK: 5000 GALLON, BULK HAUL, SELF LOAD/UNLOAD M967 AND M967A1; SEMITRAILER, TANK: 5000 GALLON, FUEL DISPENSING, AUTOMOTIVE M969 AND M969A1; SEMITRAILER, TANK: 5000 GALLON, FUEL DISPENSING, UNDER/OVERWING AIRCRAFT M970 AND M970A1
TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL
OCTOBER 1990
TM-9-2330-356-14 - Page 309 of 528
TM 9-2330-356-14
CHAPTER 5
DIRECT SUPPORT AND GENERAL SUPPORT
MAINTENANCE INSTRUCTIONS
Section I. REPAIR PARTS, SPECIAL TOOLS AND EQUIPMENT
5-1.
Repair Parts
support and general support to maintain the semitrailers.
Additional information for special tools is contained in
Repair parts required for direct support and general
TM 9-2330-356-24P.
support maintenance of the M967, M967A1, M969,
M969A1, M970, and M970A1 semitrailers are listed and 5-3.
Fabricated Tools and Equipment
illustrated in TM 9-2330-356-24P.
Table 5-2 contains fabrication instructions for all tools
5-2.
Special Tools and Equipment
which must be made by direct support or general support
personnel for maintenance of the semitrailers. Table 5-3
Table 5-1 contains a list of all special tools, components of
contains information on fabricated tube lines required by
tool sets, and test and support equipment needed by direct
direct support and general support maintenance.
Table 5-1. Special Tools, Test, and Support Equipment.
Item
NSN or
Reference
Reference No.
Use
Fig. No.
Para. No.
Puller, flywheel and sprocket
7-22
7-27
Remove flywheel and sprocket from
11671732 (1 9207)
crankshaft
Compression tool,
747
7-69
Remove end install spring seat
plunger spring
TSE-76215 (01843)
Test fixture, delivery valve
748
7-69
Testing fuel injection pump delivery
TSE-76226 (01 843)
valve
or equivalent
Centering sleeve
7-53
7-70
Assembly of fuel injector
TSE-773 (01 843)
Gage, compression tester
7-25
7-89
Testing cylinder compression
10899180 (19207)
Adapter, compression tester
7-25
7-89
On engine
Driver, valve seat
7-56
7-72
installation of valve seats in engine head
420-0270 (44940)
Driver, valve guide
7-55
7-72
Removal and installation of valve guides
420-0300 (44940)
Remover, valve
7-57
7-72
Removal of valve seats
420-0311 (44940)
Driver, oil seal
7-28
7-75
Installation of gear cover oil seal
420-0281 (44940)
Driver, bearing
7-36
7-40
Installation of crankshaft
420-0326 (44940)
7-34
7-38
and camshaft bearings
Puller ring, gear
7-33
7-36
Removal of gear from crankshaft
420-0275 (44940)
Driver, oil seal
7-34
7-77
Remove and install oil seal on rear
420-0250
of crankshaft
5-1
Back to Top
