TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 801 of 1364

TM 9-2350-238-20-1

INSPECTION/REPAIR

1

Inspect for broken, damaged, or missing parts.

2

For further disassembly, notify direct support maintenance.

3

Repair is by replacement of authorized parts (TM 9-2350-238-24P-1).

REASSEMBLY/lNSTALLATION

1

Install tube cap (8) on oil drain tube assembly (4).

2

Install new preformed packing (7) on oil drain tube assembly (4).

3

Install oil drain tube assembly (4) on auxiliary drive assembly (6) and tighten tube fitting locknut

(5).

4

Install loop clamp (3) on oil drain tube assembly (4) and secure with new Iockwasher (2) and

hexagon head capscrew (1).

2-134. MAINTENANCE OF SHIFTING CONTROL AND LINKAGE.

This task covers:

a.

Removal/Disassembly

c.

Reassembly/lnstallation

b.

Inspection/Repair

d.

Adjustment

INITIAL SETUP

Materials/Parts

Cotter pin (2)

Lockwasher (7)

Lockwasher (2)

References

TM 9-2350-238-24P-1

Equipment Conditions

2-938 Hull transmission compartment deck assembly removed

2-935 Hull engine compartment deck assembly lid removed

2-775