TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 796 of 1364

TM 9-2350-238-20-1

2-131. MAINTENANCE OF AUXILIARY DRIVE ASSEMBLY (VEHICULAR DRIVE) (CONT).

DISASSEMBLY

1

Remove machine plug (1) and preformed packing (2) from vehicular drive (3). Drain hydraulic

fluid from clutch into drain pan.

2

Remove machine plug (4) and preformed packing (5) from vehicular drive (3).

3

Remove liquid gage rod-cap (6) and preformed packing (7) from attached gage rod clutch tube

(8) .

1

Inspect for broken, damaged, or missing parts.

2

For further disassembly, notify direct support maintenance.

3

Repair by replacement of authorized parts (TM 9-2350-238-24P-1).

1

Install new preformed packing (7) and liquid gage rod-cap (6) into attached gage rod clutch tube

(8) .

2

Install new preformed packing (5) and machine plug (4) in vehicular drive (3).

3

Fill clutch housing with hydraulic fluid. Refer to the PMCS/lubrication table, page 2-13. Install

new preformed packing (2) and machine plug (1) in vehicular drive (3).

2-770