TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 872 of 1364

TM 9-2350-238-20-1

2-146. MAINTENANCE OF ROADWHEEL SUSPENSION HUB AND HUB CAP RADIO

STATIC SUPPRESSION SPRING (CONT).

REASSEMBLY (CONT)

5

Install hub seal assembly (8) on roadwheel

pivot arm assembly (9). Ensure that drive

pins on seal mate with holes on spindle

flange.

6

Pack annular ball bearing cone (10) with

grease. Seat annular ball bearing cone

firmly against collar of roadwheel pivot arm

assembly (9).

7

Install new seal assembly to hub gasket

(11), eight new Iockwashers (12), and

eight hexagon head capscrews (13) on

roadwheel suspension hub (6).

NOTE

Torque eight hexagon head cap-

screws to 32 to 35 ft-lb (43 to 47

N-m) (dry) or 23 to 25 ft-lb (31 to 34

N-m) (lubricated).

8

Pack outer roller bearing cone (14) with

grease. Install outer roller bearing cone on

roadwheel pivot arm assembly (9).

2-846