TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 869 of 1364

TM 9-2350-238-20-1

6

Using face wrench socket, remove round

plain nut (11).

Ensure that outer roller bearing does

not fall on ground.

7

Slide roadwheel suspension hub (2) from

arm and guard assembly (12).

1

2

NOTE

Procedures are written for one road

wheel arm and hub assembly, but

apply to all.

Remove outer roller bearing cone (1).

Remove eight hexagon head capscrews

(2), eight Iockwashers (3), hub seal

assembly (4), seal assembly to hub gasket

(5), and annular ball bearing cone (6) from

roadwheel suspension hub (7).

3

Remove outer roller bearing cup (8) from

roadwheel suspension hub (7), using

bearing inserter set (item 14, appx G) and

remover and replacer handle.

2-843