TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 911 of 1364

TM 9-2350-238-20-1

6

7

8

Attach sling to support lockout cylinder (3).

Using hammer puller, remove two

headless straight pins (6).

Using sling, lift lockout cylinder (3) from

hull.

1

Inspect for broken, damaged, or missing parts.

2

Hydraulic suspension lockout cylinder assembly

level of maintenance.

is a repairable assembly. Notify next higher

3

Repair is by replacement of authorized parts (TM 9-2350-238-24P-1).

1

2

3

4

5

6

Removing plugs and compressing the

cylinder may cause hydraulic fluid to

spill. Wipe up any spilled hydraulic

fluid.

Remove Iockwire (1), two plugs (2), and

two preformed packings (3).

Fully compress hydraulic suspension

lockout cylinder assembly (4).

Fill hydraulic suspension lockout cylinder

assembly (4) through two ports (5) with

hydraulic fluid.

Extend and retract cylinder rod (6) slowly.

Add hydraulic fluid as required to

completely fill hydraulic suspension

lockout cylinder assembly (4).

Install two new preformed packings (3),

two plugs (2), and new Iockwire (1).

2-885