TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 917 of 1364

TM 9-2350-238-20-1

1

Inspect for broken, darnaged, or missing

pads.

1

2

3

4

5

6

7

8

9

Install two new Iockwashers (1) and two

hexagon head capscrews (2) in pressure

switch (3).

Install new preformed packing (4), flat

washer (5), new tube fitting locknut (6),

and tube nipple (7) in lockout cylinder

control manifold (8). Tighten tube fitting

locknut.

Install new preformed packing (9) and

tube nipple (7) with assembled parts in

pressure switch (3).

Install new preformed packing (10) and

tube reducer (11) in lockout cylinder

control manifold (8).

Install new preformed packing (12) and

machine plug (13) in lockout cylinder

control manifold (8).

Install new preformed packing (14) and

check valve (15) in lockout cylinder control

manifold (8).

Install new preformed packing (16) and

tube nipple (17) in pressure reducing valve

(18).

Install new preformed packing (19),

packing retainer (20), new tube fitting

locknut (21), and tube nipple (17) in

lockout cylinder control manifold (8), and

tighten tube fitting locknut.

install new preformed packing (22),

packing retainer (23), new tube fitting

locknut (24), and tube tee (25) in pressure

reducing valve (18). Tighten tube fitting

locknut.

2 Repair is by replacement of authorized

parts (TM 9-2350-238-24P-1 ).

2-891