TM-9-2350-238-20-2

CRANE (CAB) COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT,ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1993

CHANGE 1

TM-9-2350-238-20-2 - Page 108 of 495

TM 9-2350-238-20- 2

2-14. TYPICAL FEMALE-TYPE PANE L

MOUNTING RECEPTACLE (CONT) .

REASSEMBL Y

1

2

3

4

5

6

7

8

Strip cable insulation to depth of solder

wells of socket contacts (1) .

Slide nut (2) over cable (3) .

Slide grommet (4) over cable leads

5) .

Insert cable leads (5) into solder wells o f

socket contacts (1) and solder .

Push insert (6) into shell assembly (7)

from rear until seated. Groove (8) in in-

sert (6) must be alined with guide i n

shell assembly (7) to ensure proper fit .

Push socket contacts (1) into insert (6 )

from rear until seated .

Push grommet (4) down cable leads (5)

and over solder wells of socket contacts

(1) .

Screw nut (2) onto shell assembly (7) .

2-15. TYPICAL MALE-TYP E

MOUNTING RECEPTACLE .

DISASSEMBLEY

1 Unscrew nut (1) from shel l

and slide back on cable (3) .

PANE L

assembly (2 )

2 Push grommet (4) back on cable lead s

(5) .

3 Drive pin contacts (6) out through rear o f

insert (7) with pin extractor .

4 Push insert (7) out through rear of shel l

assembly (2) .

5 Unsolder cable leads (5) from pin con -

tacts (6) .

2-6 8