TM-9-2350-238-20-2

CRANE (CAB) COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT,ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1993

CHANGE 1

TM-9-2350-238-20-2 - Page 111 of 495

TM 9-2350-238-20- 2

REASSEMBL Y

1

2

3

4

5

6

7

8

9

Strip cable of insulation equal to depth o f

solder wells of pin contacts (1) .

Slide nut (2) over cable (3) .

Slide grommet (4) over cable leads (5) .

Insert cable leads (5) into solder wells o f

pin contacts (1) and solder .

Push insert (6) into shell assembly (7)

from rear until seated. Groove (8) in in-

sert (6) must be alined with guide i n

shell assembly (7) to ensure proper fit .

Push pin contacts (1) into insert (6) fro m

rear until seated .

Slide coupling (9) onto shell assembly

(7) .

Push grommet (4) down cable leads (5)

and over solder wells of pin contacts (1) .

Screw nut (2) onto shell assembly (7) .

2-18. REPLACING CABLE TERMINAL S

AND CONNECTORS .

TERMINAL-TYPE CABLE CONNECTOR

1

2

3

4

Strip cable insulation equal to depth o f

terminal well (1) .

Slide insulator (2) over cable (3) .

Insert cable (3) into terminal well (1) an d

crimp .

Slide insulator (2) over crimped end o f

terminal (4) .

2-7 1