TM-9-2350-238-20-2

CRANE (CAB) COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT,ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1993

CHANGE 1

TM-9-2350-238-20-2 - Page 109 of 495

TM 9-2350-238-20- 2

REASSEMBL Y

1

2

3

4

5

6

7

8

Strip cable insulation equal to depth o f

solder wells of pin contacts (1) .

Slide nut (2) onto cable (3) .

Slide grommet (4) over cable leads (5) .

Insert cable leads (5) into solder wells o f

pin contacts (1) and solder .

Push insert (6) into shell assembly (7)

from rear until seated. Groove (8) in in-

sert (6) must be alined with guide i n

shell assembly (7) to ensure proper fit .

Push pin contacts (1) into insert (6) fro m

rear until seated .

Push grommet (4) down cable leads (5)

and over solder wells of pin contacts (1).

Screw nut (2) onto shell assembly (7) .

2-16. TYPICAL FEMALE-TYPE PLUG .

DISASSEMBLEY

1

Unscrew nut (1) from shell assembly (2 )

and slide back on cable (3) .

2

Slide grommet (4) back on cable lead s

(5) .

3

Slide coupling (6) off shell assembly (2) .

4

Drive socket contacts (7) out throug h

rear of insert (8) with pin extractor .

5

Push insert (8) out through rear of shel l

assembly (2) .

6

Unsolder cable leads (5) from socke t

contacts (7) .

2-6 9