TM 9-2350-238-34-1
2-15. TYPICAL MALE-TYPE PANE L
DISASSEMBLY
1
2
3
4
5
Unscrew nut (1) from shell assembly (2) and
slide back on cable (3).
Push grommet (4) back on cable leads (5).
Drive pin contacts (6) out through rear of
insert (7) with pin extractor.
Push insert (7) out through rear of shell
assembly (2) .
Unsolder cable leads (5) from pin contacts
MOUNTING RECEPTACLE CONNECTOR .
(6) .
REASSEMBLY
1
2
3
4
5
6
7
8
Strip cable insulation equal to depth of solder
wells of pin contacts (1).
Slide nut (2) onto cable (3).
Slide grommet (4) over cable leads (5).
Insert cable leads (5) into solder wells of pin
contacts (1) and solder.
Push insert (6) into shell assembly (7) from
rear until seated. Groove (8) in insert (6)
must be aligned with guide in shell assembly
(7) to ensure proper fit.
Push pin contacts (1) into insert (6) from rear
until seated .
Push grommet (4) down cable leads (5) an d
over solder wells of pin contacts (l).
Screw nut (2) onto shell assembly (7).
2-2 4