TM-9-2350-238-34-1
HULL AND RELATED COMPONENTS, RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
MARCH 1994
TM-9-2350-238-34-1 - Page 39 of 292
TM 9-2350-238-34-1
2-18. REPLACING CABLE TERMINALS AND SHELL CONNECTORS.
TERMINAL-TYPE CABLE CONNECTOR S
1
2
3
4
Strip cable insulation equal to depth of
terminal well (1).
Slide insulator (2) over cable (3).
Insert cable (3) into terminal well (1) and
crimp .
Slide insulator (2) over crimped end
of terminal (4) .
MALE CABLE SHELL CONNECTOR
1
2
3
4
Strip cable insulation equal to depth of
ferrule well (l) .
Slide shell assembly (2) over cable (3).
Insert cable (3) into ferrule well (1) and
crimp .
Place C-washer (4) over cable (3) at crimped
junction and slide shell assembly (2) over
C-washer (4) and ferrule (5).
FEMALE CABLE SHELL CONNECTO R
(WITH WASHER )
1
2
3
4
Strip cable insulation approximately 1/8 in.
(0.318 cm) .
Slide shell assembly (1) and washer (2) over
cable (3) .
Place cable (3) in cylindrical end of terminal
(4) and crimp .
Slide shell assembly (1) and washer (2) over
terminal (4) .
2-2 7
Back to Top
