TM-9-2350-238-34-1
HULL AND RELATED COMPONENTS, RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
MARCH 1994
TM-9-2350-238-34-1 - Page 37 of 292
2-16. TYPICAL FEMALE-TYPE PLU G
DISASSEMBL Y
1
2
3
4
5
6
CONNECTOR .
Unscrew nut (1) from shell assembly (2) and
slide back on cable (3).
Slide grommet (4) back on cable leads (5).
Slide coupling (6) off shell assembly (2).
Drive socket contacts (7) out through rear of
insert (8) with pin extractor.
Push insert (8) out through rear of shell
assembly (2) .
Unsolder cable leads (5) from socke t
contacts (7) .
REASSEMBLY
1
2
3
4
5
6
7
8
9
Strip cable insulation equal to depth of solder
wells of socket contacts (1).
Slide nut (2) over cable (3).
Slide grommet (4) over cable leads (5).
Insert cable leads (5) into solder wells of
socket contacts (1) and solder.
Push insert (6) into shell assembly (7) from
rear until seated. Groove (8) in insert (6)
must be aligned with guide in shell assembly
(7) to ensure proper fit.
Push socket contacts (1) into insert (6) from
rear until seated.
Slide coupling (9) onto shell assembly (7).
Push grommet (4) down cable leads (5) an d
over solder wells of socket contacts (1).
Screw nut (2) onto shell assembly (7).
2-2 5
Back to Top
