TM-9-2350-256-10
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
OPERATOR'S MANUAL
OCTOBER 2014
TM-9-2350-256-10 - Page 420 of 796
CARRYING LOAD WITH LOCKOUT BLOCKS INSTALLED
1.
Maximum vehicle speed carrying 6 to 15 tons (5.4 to 13.6 metric tons) (Figure 1) is 3 mph (5 km/h).
2.
Maximum vehicle speed carrying 15 to 20 tons (13.6 to 18.1 metric tons) (Figure 1) is 2 mph (3 km/h).
Figure 1.
Hoisting Loads Positioning.
LOCKOUT BLOCKS INSTALLATION
1.
Start main engine (WP 0010).
2.
Raise front of vehicle by driving up on spade (WP 0075).
3.
Lock brakes and shut down main engine (WP 0017).
4.
Slide lockout block (Figure 2, Item 1) over inside spindle (Figure 2, Item 3) of front roadwheel on each side.
Ensure lockscrew (Figure 2, Item 2) faces toward rear of vehicle.
5.
Tighten lockscrew (Figure 2, Item 2) to keep it in place.
6.
Start main engine (WP 0010), unlock brakes, and back off spade (WP 0075).
7.
Shut down main engine (WP 0017).
Figure 2.
Lockout Block Installation.
END OF TASK
TM 9-2350-256-10
0077
0077-2
Back to Top
