TM-9-2350-256-10
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
OPERATOR'S MANUAL
OCTOBER 2014
TM-9-2350-256-10 - Page 561 of 796
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) – WEEKLY,
INCLUDING LUBRICATION INSTRUCTIONS
INITIAL SETUP:
Tools and Special Tools
General mechanic's tool kit
(WP 0135, Table 1, Item 2)
Offset funnel (WP 0132, Table 2, Item 25)
Suitable container
Materials/Parts
Lens paper Qty: AR (WP 0134, Table 1, Item 55)
Wiping rags Qty: AR (WP 0134, Table 1, Item 57)
Personnel Required
Crewman (2)
References
AN/VVS-2(V)1A night periscope operation, if
equipped (WP 0039)
Auxiliary Power Unit (APU) air cleaner
maintenance (WP 0120)
Auxiliary Power Unit (APU) compartment door
operation (WP 0033)
Auxiliary Power Unit (APU) operation in all
conditions (WP 0042)
Commander's cupola operation (WP 0026)
Dome light operation (WP 0018)
Driver's Vision Enhancer (DVE) operation, if
equipped (WP 0040)
References (cont.)
Engine deck grilles operation (WP 0030)
Floor access plates and doors operation
(WP 0027)
Gas Particulate Filter Unit (GPFU) operation
(WP 0041)
Hatch operation (WP 0025)
Light switch assembly operation (WP 0022)
Lubrication instructions (WP 0101)
Main engine air cleaner maintenance (WP 0119)
Outside spotlight operation (WP 0019)
Oxygen cylinder replacement (WP 0124)
Personnel doors operation (WP 0024)
Personnel heater operation (WP 0037)
Rear service lights operation (WP 0021)
Smoke grenade launcher system maintenance
(WP 0122)
Stowage and decal/data plate guide (WP 0065)
TM 9-1005-213-10 (WP 0131)
TM 11-5855-249-10 (WP 0131)
TM 11-5855-311-12&P-2 (WP 0131)
Vision devices maintenance (WP 0116)
Equipment Condition
Vehicle parked on level surface
All BEFORE PMCS performed (WP 0096)
Table 1.
Operator Preventive Maintenance Checks and Services (PMCS) – Weekly.
ITEM
NO.
INTERVAL
ITEM TO BE
CHECKED OR
SERVICED
PROCEDURE
EQUIPMENT
NOT READY/
AVAILABLE IF:
CAUTION
Refer to Lubrication Instructions Tables 2
through 5 (WP 0101) for proper use of
lubricants and temperature ranges. Using
the wrong lubricant may cause erratic
operation of equipment. Failure to comply
may result in damage to equipment.
TM 9-2350-256-10
0099
0099-1
Back to Top
