TM-9-2350-260-20-1-2
TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9
TM-9-2350-260-20-1-2 - Page 17 of 772
TM 9-2350-260-20-1-2
POWERPLANT REPLACEMENT (2A ENGINE) (Sheet 6 of 24)
WARNING
Support brake rod access covers (V) with hand to prevent personal injury.
20.
Using 9/16 inch socket remove 12 screws and lockwashers (U) from left and right brake rod access covers (V).
Remove covers.
Throw lockwashers away.
21.
Using putty knife, remove left and right brake rod access cover gaskets Throw gaskets away.
22.
Reach through brake rod access opening with
5/16 inch wrench and loosen two clamps (W) and
slide rubber boot (X) forward (both sides of tank).
NOTE
If your tank has a spring loaded sleeve (Y) type disconnect perform step 23.
If it
has a screw, lockwasher, and nut (Z) type, go to step 24.
Go on to Sheet 7
TA147908
5-7
Back to Top
