TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 223 of 772

TM 9-2350-260-20-1-2

TRANSMISSION OIL COOLER REPLACEMENT (2D ENGINE) (Sheet 3 of 10)

6.

Using plastic barrier material (Item 41, Appendix

D) and masking tape (Item 57, Appendix D), wrap

ends of hoses (E) and (F) and transmission

connectors (D) to keep out dirt.

7.

Place drip pan or rags (Item 65, Appendix D)

under cooler connectors (G).

8.

Using 1-1/2 inch wrench, remove hose (H) at

cooler connectors (G).

9.

Using 1-1/2 inch wrench, remove hose (J) from

cooler connector (G).

10.

Using plastic barrier material (Item 41, Appendix D) and masking tape (Item 57, Appendix D), wrap ends of hoses

(H) and (J) and cooler connectors (G) to keep out dirt.

11.

Move hoses out of the way toward rear of powerplant.

Go on to Sheet 4

TA147597

6-146