TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 217 of 772

TM 9-2350-260-20-1-2

TRANSMISSION OIL COOLER REPLACEMENT (2A ENGINE) (Sheet 7 of 10)

INSTALLATION:

1.

Position retainer and seal (A) under top frame

and secure with five fasteners (B).

2.

Using hands install connectors (C) and (D) in oil

cooler (E).

3.

Using 1-5/8 inch wrench, tighten two locknuts (F).

4.

Install gasket (G) on bypass valve (H).

5.

Using 1-3/4 inch wrench, install bypass valve (H)

in oil cooler (E).

6.

Position shroud plate (J) and oil cooler (E).

7.

Using

1/2

inch

socket,

install

two

new

lockwashers and screws (K) securing shroud

plate (J) to oil cooler (E).

8.

Position engine shroud (J) on oil cooler (E)

behind engine oil cooler, then push left end of oil

cooler (E) into place.

Go on to Sheet 8

TA147592

6-140