TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 209 of 772

TM 9-2350-260-20-1-2

ENGINE OIL COOLER REPLACEMENT (2D ENGINE) (Sheet 5 of 6)

10.

Using 1/2 inch socket with extension through

harness and into bracket, install two washes and

screws (E).

11.

Using 1/2 inch wrench, install oil cooler vent hose

(F) at top of cooler.

12.

Remove plastic material and masking tape from

hose (G) and oil cooler connector (H).

13.

Using 1-1/2 inch wrench, install hose (G) at oil

cooler connector (H).

14.

Remove plastic material and masking tape from

hose (J) and oil cooler connector (K).

15.

Using 1-1/2 inch wrench, install hose (J) at oil

cooler connector (K).

Go on to Sheet 6

TA147583

6-132