TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 210 of 772

TM 9-2350-260-20-1-2

ENGINE OIL COOLER REPLACEMENT (2D ENGINE) (Sheet 6 of 6)

16.

Using 3/4 inch socket, tighten valve (L).

17.

Install new washer on screw (M).

18.

Using 1/2 inch socket, install washer and screw

(M).

19.

Check engine oil level indicator gage rod (TM

9-2350-260-10).

20.

Replenish lubricating oil lost during oil cooler

replacement (LO 9-2350-260-1-2).

21.

Connect engine for powerplant ground hop (page

5-54).

22.

Start and run engine.

Check for oil leaks at oil

cooler and hose connections.

23.

Shut down engine.

Disconnect engine from

powerplant ground hop kit (page 5-67).

24.

Install engine shroud (page 9-3).

25.

Install powerplant (page 5-40).

End of Task

TA147584

6-133