TM-9-2350-260-20-1-2
TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9
TM-9-2350-260-20-1-2 - Page 225 of 772
TM 9-2350-260-20-1-2
TRANSMISSION OIL COOLER REPLACEMENT (2D ENGINE) (Sheet 5 of 10)
15.
Using socket, remove two screws and washers
(M) holding oil cooler screen to oil cooler.
16.
Remove oil cooler screen.
CAUTION
Using another person, support oil cooler to keep it from falling while doing steps
17 through 19.
17.
Using 3/4 inch wrench, remove two screws and washers (N) holding oil cooler screen mounting bracket (P) to oil
cooler and oil cooler to oil cooler frame.
18.
Remove oil cooler screen mounting bracket (P).
19.
Using 3/4 inch wrench, remove two screws and washers (Q) holding oil cooler to oil cooler frame.
20.
Remove oil cooler.
Go on to Sheet 6
TA147599
6-148
Back to Top
