TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 232 of 772

TM 9-2350-260-20-1-2

ENGINE OIL COOLER FLUID PUMP CONNECTOR REPLACEMENT (2D ENGINE) (Sheet 2 of 4)

REMOVAL:

1.

Using 9/16 inch wrench, remove vent bolt (A) and

sealing washer (B).

2.

Throw washer (B) away.

3.

Using 3/4 inch wrench, loosen oil drain valve (C)

six complete turns.

4.

Using screwdriver and 3/8 inch wrench, remove

clamp (D) on hose (E) If clamp is attached to

hose.

If clamp (D) i not attached to hose (E), go

to step 5.

5.

Using 1-1/2 inch wrench, remove fitting (F) from

connector (G).

6.

Using two 1-1/2 inch wrenches on hose (E) and

fitting (H), remove hose (E).

7.

Using 1/2 inch wrench, remove three self-locking

nut (J) from connector (G).

8.

Throw three nuts (J) away.

9.

Remove connector (G).

Go on to Sheet 3

TA147604

6-155