TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 244 of 772

TM 9-2350-260-20-1-2

THERMOSTATIC TRANSMISSION OIL COOLER VALVE ASSEMBLY (RIGHT SIDE) TEST AND REPLACEMENT (2D

ENGINE) (Sheet 3 of 7)

REMOVAL:

1.

Place rags under tube end fittings (A) and (B) on

transmission.

NOTE

It may be necessary to hold adapters

(C) and (D) with 1-5/8 inch wrench

while removing tube end fittings (A)

and (B)

2.

Using 1-1/2 inch wrench, remove tube end fitting

(A) from adapter (C).

3.

Place rags under tube end fittings (E) and (F) at oil

cooler.

NOTE

It may be necessary to hold adapters

(G) and (H) with 1-5/8 inch wrench

while removing tube end fittings (E)

and (F).

4.

Using 1-1/2 inch wrench, remove outside tube end

fitting (E) from adapter (G).

5.

Displace tube (J).

6.

Using 1-5/8 inch wrench, remove adapter (G).

7.

Using 1-1/2 inch wrench, remove tube end fitting

(F) from adapter (H).

Go on to Sheet 4

TA147615

6-167