TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 391 of 772

TM 9-2350-260-20-1-2

AIR CLEANER (ALUMINUM AND SIDE LOADING) BLOWER FAN HOSE REPLACEMENT (Sheet 1 of 1)

TOOLS:

Flat-tip screwdriver

SUPPLIES:

Silicone compound (Item 32, Appendix D)

PRELIMINARY PROCEDURES:

Remove air cleaner cover and gasket (page 7-131, steps 1 thru 3)

Remove air cleaner blower fan, if necessary (page 7-125)

NOTE

Aluminum air cleaner shown.

Procedure for side loading air cleaner is similar.

REMOVAL:

1.

Using screwdriver, loosen two clamps (A).

2.

Slide clamps (A) onto hose (B).

3.

Remove hose (B) from blower fan (C) and housing

(D).

4.

Inspect hose (B) and clamps (A).

Replace as

necessary.

INSTALLATION:

1.

Position clamps (A) onto hose (B).

2.

Coat inside diameter of hose ends with silicone

compound (Item 32, Appendix D) and install hose

(B) to blower fan (C) and housing (D).

3.

Slide clamps (A) to ends of hose.

Using screwdriver, tighten clamps (A).

4.

Install air cleaner blower fan, if required (page 7-129).

5.

Install air cleaner cover and gasket (page 7-133, steps S thru 5).

End of Task

TA148197

7-122