TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 385 of 772

TM 9-2350-260-20-1-2

AIR CLEANER (ALUMINUM AND SIDE LOADING) CIRCUIT BREAKER REPLACEMENT (Sheet 1 of 1)

TOOL:

Flat-tip screwdriver

SUPPLIES:

Lockwasher (MS35335-17) (4 required)

REFERENCE:

TM 9-2350-260-10

PRELIMINARY PROCEDURE:

Remove air cleaner cover and gasket (page 7-132, steps 1 thru 3)

REMOVAL:

1.

Using screwdriver, remove four screws (A) and lockwashers (B) securing two circuit breakers (C) to cover (D).

Throw lockwashers away.

2.

Remove two circuit breaker.

(C).

INSTALLATION:

1.

Position two circuit breakers (C) onto cover (D).

2.

Install new lockwashers (B) and screws (A) to

secure circuit breakers (C) to cover (D).

Using

screwdriver, tighten screws (A).

3.

Install cover and gasket (page 7-133, steps 3, 4, 8,

and 9).

4.

Check operation of blowers (TM 9-2350-260-10).

End of Task

TA148191

7-116