TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 540 of 772

TM 9-2350-260-201-2

FUEL-WATER SEPARATOR FUEL FILTER OUTLET HOSE ASSEMBLY REPLACEMENT (Sheet 2 of 3)

REMOVAL:

1.

Using 9/16 inch wrench, remove self-locking nut

(A) and hose clamp (B) from hose assembly (C).

Throw self-locking nut away.

2.

Using 7/8 inch wrench, remove hose assembly (C)

from bulkhead elbow (D).

3.

Using 7/8 inch wrench, remove hose assembly (C)

from elbow (E) of fuel-water separator fuel filter

(F).

CLEANING AND INSPECTION:

1.

Using clean rags (Item 65, Appendix D) and dry

cleaning solvent (Item 54, Appendix D), clean

hose amp thoroughly.

2.

Inspect hose clamp for wear or damage.

3.

Inspect bulkhead elbow and fuel-water separator

fuel filter outlet elbow for stripped threads.

4.

Replace defective parts as required.

Go on to Sheet 3

TA148346

7-271