TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 549 of 772

TM 9-2350-260-20-1-2

FUEL-WATER SEPARATOR DRAIN SOLENOID VALVE REPLACEMENT (2D ENGINE) (Sheet 2 of 3)

3.

Using 7/16 inch wrench, turn fuel-water separator

bleed cap (B) counterclockwise until loose.

4.

Allow fuel in fuel-water separator filter (C) to drain

through drain valve (A).

5.

Move drip pan to catch fuel

from hose assembly D).

6.

Using two 9/16 inch wrenches, disconnect hose

assembly (D) from solenoid valve (E).

7.

Using pliers, disconnect electrical lead (F) from

solenoid valve (E).

8.

Using 5/16 inch wrench, remove two screws and

washers (G) securing solenoid valve (E) to

bracket.

Throw washers (G) away.

9.

Remove solenoid valve (E).

NOTE

It will be necessary to secure

solenoid valve (E) in vise.

10.

Using 9/16 inch wrench, remove elbow and tube

(H) as a unit from solenoid valve (E).

11.

Using 9/16 inch wrench, remove adapter (J) from

solenoid valve (E).

Go on to Sheet 3

TA148355

7-280