TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 550 of 772

TM 9-2350-260-20-1-2

FUEL-WATER SEPARATOR DRAIN SOLENOID VALVE REPLACEMENT (20 ENGINE) (Sheet 3 of 3)

INSTALLATION:

NOTE

Coat all exposed threads of adapter

and elbow with zinc-chromate primer

(Item

50,

Appendix

D)

before

installing.

1.

Using 9/16 inch wrench, install elbow and tube (A)

to solenoid valve (B).

2.

Using 9/16 inch wrench, install adapter (C) n

solenoid valve (B).

3.

Position solenoid valve (B) to bracket

4.

Using 5/16 inch wrench, install two screws and new

washers (D) to secure solenoid valve (B) to

bracket.

5.

Using two 9/16 Inch wrenches, connect hose

assembly (E) to adapter (C).

6.

Connect electrical lead (F) to solenoid valve (B).

7.

Close drain valve (G) by turning valve handle

clockwise.

8.

Using 7/16 inch wrench, turn bleed cap (H)

clockwise until snug.

9.

Test fuel-water separator (page 7-245, steps 1

thru 11).

10.

Install powerplant (page 5-40).

End of Task

TA148356

7-281