TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 553 of 772

TM 9-2350-260-20-1-2

FUEL-WATER SEPARATOR DRAIN LINES REPLACEMENT (2D ENGINE) (Sheet 3 of 6)

6.

Using 9/16 inch wrench, remove nut (D) securing

damp (E).

7.

Remove lamp (E) from hose assembly (F).

8.

Using 9/16 inch wrench, disconnect hose

assembly (F) from elbow (G).

9.

Using 11/16 inch wrench to hold adapter (H), use

9/16 inch wrench and disconnect hose assembly

(F) from adapter (H).

10.

Remove hose assembly (F).

11.

Using 9/16 inch wrench, disconnect hose

assembly (J) from tee (K).

12.

Using 5/8 inch wrench to hold tee (K), use

adjustable wrench and remove drain valve (A).

13.

Using 11/16 inch wrench to hold adapter H), use

11/16 inch wrench and remove nut (L).

Tee (K)

and adapter (H) will fall free when nut (L) is

removed.

Throw lockwasher (L) away.

14.

Install tee (K) into vise, and, using 11/16 inch wrench, remove adapter (H) from tee (K).

Go on to Sheet 4

TA148359

7-284