TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 558 of 772

TM 9-2350-260-20-1-2

FUEL-WATER SEPARATOR CONTROL ASSEMBLY REPLACEMENT (2D ENGINE) (Sheet 2 of 8)

REMOVAL:

1.

Place drip pan under manual drain valve (A).

2.

Open manual drain valve (A) by turning valve

handle to the left.

3.

Using 7/16 inch wrench, turn fuel-water separator

bleed cap (B) to the left until loose.

4.

Allow fuel in fuel-water separator filter (C) to drain

through manual drain valve (A).

5.

Using 7/16 inch wrench, turn fuel-water separator

bleed cap (B) to the right until snug.

6.

Close manual drain valve (A) by turning valve handle to the right.

7.

Remove drip pan placed under manual drain valve (A).

Go on to Sheet 3

TA148364

7-289