TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 566 of 772

TM 9-2350-260-20-1-2

FUEL-WATER SEPARATOR FILTER ELEMENT REPLACEMENT (Sheet 2 of 6)

REMOVAL:

NOTE

Replacement of outer filter elements

is required semi-annually or every

1500 miles of tank operation.

Center

filter element is to be replaced

annually.

NOTE

When removing cover, make sure not

to let any dirt fall into fuel-water

separator.

1.

Using 7/16 inch wrench, remove eight screws (A),

lockwashers (B), and fat washers (C).

Throw

lockwashers away.

2.

Remove cover (D) from fuel-water separator (E).

3.

Remove preformed packing (F) from cover (D).

Throw packing away.

4.

Place container under fuel-water separator (E) to

catch fuel from fuel outlet line.

5.

Using 7/8 inch wrench, disconnect fuel outlet line

(G) from elbow (H).

6.

Using rags (Item 65, Appendix D), cover fuel outlet

line (G) to prevent dirt getting into line.

Go on to Sheet 3

TA148372

7-297