TM 9-2350-260-20-1-2
FUEL-WATER SEPARATOR FILTER ELEMENT REPLACEMENT (Sheet 4 of 6)
6.
Place new preformed packing (F) in position in
cover (G).
4.
Place two outer filter elements (C) in position in
fuel-water separator (D).
5.
Place center filter element (E) in position in fuel-
water separator (D), if required.
7.
Place cover (G) in position on fuel-water separator
(D).
8.
Using 7/16 inch wrench, install eight screws (H)
new lockwashers (J) and flat washers (K).
Go on to Sheet 5
TA148374
7-299