TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 556 of 772

TM 9-2350-260-20-1-2

FUEL-WATER SEPARATOR DRAIN LINES REPLACEMENT (2D ENGINE) (Sheet 6 of 6)

6.

Install tee (F) into vise, and, using 11/16 inch wrench, install adapter (G) into tee (F).

7.

Remove tee (F) and adapter (G) assembly from

vise.

8.

Position tee (F) and adapter (G) assembly into

mounting bracket (H):

9.

Using 11/16 inch wrench to hold adapter (G), use

11/16 inch wrench and install new lockwasher and

nut (J) onto adapter (G).

10.

Using adjustable wrench, install drain valve (K)

into tee (F).

11.

Position hose assembly (L) to adapter (G) and

elbow (M).

12.

Using 9/16 inch wrench, install hose assembly (L)

to adapter (G) and elbow (M).

13.

Using 9/16 inch wrench, install hose assembly (D)

to tee (F).

14.

Position clamp (N) onto hose assembly (L).

15.

Using 9/16 inch wrench, install nut (P) to secure

clamp (N).

16.

Close drain valve (K) by turning clockwise.

17.

Test fuel-water separator (page 7-262, steps 1

thru 11).

18.

Install powerplant (page 5-40).

End of Task

TA149362

7-287