TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 541 of 772

TM 9-2350-260-20-1-2

FUEL-WATER SEPARATOR FUEL FILTER OUTLET HOSE ASSEMBLY REPLACEMENT (Sheet 3 of 3)

INSTALLATION:

1.

Coat threads of bulkhead elbow (A) with sealing

compound (Item 27, Appendix D).

2.

Using fingers, install hose assembly (B) on

bulkhead elbow (A).

3.

Using 7/8 inch wrench, tighten nut (C) of hose

assembly (B) on bulkhead elbow (A).

4.

Coat threads of fuel-water separator fuel filter

outlet elbow (D) with sealing compound (Item 27,

Appendix D).

5.

Using fingers, install hose assembly (B) on fuel-

water separator fuel filter outlet elbow (D).

6.

Using 7/8 inch wrench, tighten nut of hose

assembly (B) on fuel-water separator fuel filter

outlet elbow (D).

7.

Using fingers, install hose clamp (E) on hose

assembly (B).

8.

Using fingers, install hose clamp (E) and hose

assembly (B) on mounting stud (F).

9.

Using 9/16 inch wrench, install new self-locking

nut (G) on hose clamp (E) and mounting stud (F).

10.

Perform powerplant test run (page 5-65).

11.

Install 2A powerplant (page 5-14) or 2D

powerplant (page 5-40).

End of Task

TA148347

7-272