TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 746 of 772

TM 9-2350-280-20-1-2

TRANSMISSION SHROUDS REPLACEMENT (Sheet 6 of 8)

Lower Shroud Replacement (Sheet 1 of 2)

TOOLS:

1/2 in. socket with 1/2 in. drive

Ratchet with 1/2 in. drive

1/2 in. combination box and open end wrench

6 in. flat-tip screwdriver

2 in. fiat-tip screwdriver

PRELIMINARY PROCEDURES:

Remove powerplant (page 5-1)

Remove engine shroud (page 9-2)

NOTE

Replacement of right and left lower

shrouds (A) is similar.

Left lower

shroud (A) is shown.

NOTE

When lower shroud is removed,

grommet (G) may come out with it or

stay on fuel return line.

REMOVAL:

1.

Using 2 inch screwdriver, remove screw (B).

2.

Using 6 inch screwdriver, remove screw (C).

3.

Using socket or wrench, remove five screws and

washers (D).

4.

Using socket or wrench, remove screw and

washer (E) securing clamp (F).

5.

Remove lower shroud CA).

Be careful not to

damage fuel return line when removing shroud

(A).

6.

Inspect grommet (G) for tears or deterioration.

Replace if defective.

Go on to Sheet 2

TA146890

9-44