TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 750 of 772

TM 9-2350-20-20-1-2

ENGINE COOLING FAN REPLACEMENT (Sheet 2 of 4)

CAUTION

Do not drop screws and lockwashers into fan assembly.

NOTE

Both engine cooling fans are replaced the same.

REMOVAL:

1.

Using 9/16 inch socket, remove four screws and lockwashers (A) holding fan cover (B) to engine.

Throw

lockwashers away.

2.

Remove fan cover a).

3.

Using slip joint pliers, remove cotter pin (C) and throw away.

4.

Using 1-1/4 inch socket, remove hex nut and fiat

washer (D) holding fan to shaft (E).

5.

Remove assembled fan and hub (D) from shaft

(E).

Go on to Sheet 3

TA146894

9-48