TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 759 of 772

TM 9-2350-260-20-1-2

ENGINE COOLING FAN SHROUD REPLACEMENT (Sheet 7 of 8)

10.

Position two pieces of fan housing (J) onto powerplant.

11.

Using two 9/16 inch wrenches, install two screws, washers, and self-locking nut (K) securing two pieces of fan

housing (J) together.

12.

Using 9/16 inch socket, install four screws and new lockwashers (L) securing fan housing (J) to fan shroud (A).

13.

Using hands, position fan (M) onto engine.

14.

Using 1-1/4 inch socket, install washer (N) and nut

(P) securing fan (M) to engine.

15.

Using 1-1/4 inch socket and torque wrench,

tighten nut (P) to 50-55 lb-ft (68-75 N

•

m).

16.

Back nut (P) off until slot in nut (P) alines with hole

in shaft.

Using pliers, install new cotter pin (Q).

Go on to Sheet 8

TA146903

9-57