TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 755 of 772

TM 9-2350-260-20-1-2

ENGINE COOLING FAN SHROUD REPLACEMENT (Sheet 3 of 8)

8.

Using pliers, remove cotter pin (J) from nut (K).

Throw cotter pin away.

9.

Using 1-1/4 inch socket, remove nut and washer

(K) securing rear fan (L) to engine.

10.

Lift fan (L) from engine.

NOTE

Four nuts (N) are located under fan

shroud and hold fuel line clamps.

When nut (N) and screws (P) are

removed, clamps will remain on fuel

line.

11.

Using 1/2 inch socket, remove three screws (M).

12.

Using 1/2 inch wrench to hold nuts (N), use 1/2

inch socket and remove four screws (P) and nuts

(N).

13.

Using 1/2 inch socket, remove five screws (Q)

securing shroud (D) to engine.

Go on to Sheet 4

TA146899

9-53