TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 748 of 772

TM 9-2350-260-20-1-2

TRANSMISSION SHROUDS REPLACEMENT (Sheet 8 of 8)

Left Intermediate Shroud Replacement

TOOLS:

1/2 in. socket with 1/2 in. drive

Ratchet with 1/2 in. drive

1/2 in. combination box and open end wrench

PRELIMINARY PROCEDURES:

Remove powerplant (page 5-1)

Remove oil filler (upper) tube (page 6-41)

REMOVAL:

1.

Using socket and wrench, remove assembled washer bolt (A).

2.

Using wrench or socket, remove seven screws and washers (B) securing intermediate shroud (C) to engine.

3.

Remove intermediate shroud (C).

INSTALLATION:

1.

Position intermediate shroud (C) into place on engine.

2.

Install seven screws and washers (B) to secure intermediate shroud (C) to engine.

3.

Install assembled washer bolt (A).

4.

Using wrench and socket, tighten screws (A) and (B).

5.

Install engine oil filler tube (page 6-43).

6.

Install 2A powerplant (page 5-14) or 2D powerplant (page 5-40).

End of Task

TA146892

9-46