TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 349 of 783

TM 9-2350-260-20-1-3

ENGINE WIRING HARNESS REPLACEMENT (2A ENGINE)(Sheet 1 of 13)

PROCEDURE INDEX

PROCEDURE

PAGE

Removal

10-338

Installation

10-344

TOOLS: 3/8 in. combination box and open end wrench

7/16 in. combination box and open end wrench

9/16 in. combination box and open end wrench

3/4 in. combination box and open end wrench

7/16 in. socket with 1/2 in. drive

1/2 in. socket with 1/2 in. drive

3/4 in. socket with 1/2 in. drive

Ratchet with 1/2 in. drive

5 in. extension with 1/2 in. drive

Slip joint pliers

Flat-tip screwdriver

SUPPLIES: Self-locking nuts (MS20365-B1032A)(2 required)

Silicone compound (Item 32, Appendix D)

Lockwasher (MS35338-63)(2 required)

Lockwasher (MS35338-43)(4 required)

Lockwasher (MS21045-4)

Lockwasher (MS35338-45)(7 required)

PRELIMINARY PROCEDURE: Remove powerplant (page 5-2).

Go on to Sheet 2

TA147369

10-337